IMPORTANT
You must disconnect and lockout the electric supply and the gas supply or the steam supply before any covers or guards are removed from the machine to allow access for cleaning, adjusting, installation, or testing of any equipment per OSHA standards.
Please observe all safety precautions displayed on the equipment and/or specified in the installation manual included with the dryer.
CAUTION
Dryer(s) should never be left unattended while in operation.
“Caution: Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper operation.”
«Attention: Au moment de l’entretien des commandes, étiquetez tous les fils avant de les débrancher. Des erreurs de câblage peuvent entraîner un fonctionnement inadéquat et dangereux.»
WARNING
Children should not be allowed to play on or near the dryer(s). Children should be supervised if near dryer(s) in operation.
Under no circumstances should the dryer door switch(es), lint door/drawer switch(es), or heat safety circuit(s) ever be disabled.
The dryer must never be operated with any of the back guards, outer tops, or service panels removed. Personal injury or fire could result.
The dryer must never be operated without the lint filter/screen in place, even if an external lint collection system is used.
FOR YOUR SAFETY
Do not dry mop heads in the dryer. Do not use dryer in the presence of dry cleaning fumes.
The dryers must not be installed or stored in an area where it will be exposed to water and/or weather.
The wiring diagram for the dryer is located in the front electrical control box area.
Table of Contents ________ | |
Important Information | 4 |
Safety Precautions | 4 |
Routine Maintenance | 4 |
Cleaning | 4 |
Adjustments | 5 |
Lubrication | 5 |
Installation Requirements | 5 |
Enclosure, Air Supply, |
|
and Exhaust Requirements | 5 |
Electrical and Gas Requirements | 6 |
Operational Service Check Procedure | 6 |
Description of Parts | 6 |
Servicing | 10 |
Troubleshooting | 20 |
Phase 6 OPL System Diagnostics | 21 |
Diagnostic (L.E.D. Display) Failure Codes | 21 |
L.E.D. Display Indicators | 22 |
Phase 6 OPL Microprocessor Controller |
|
(Computer) Relay Output L.E.D. Indicators | 23 |
Phase 7 OPL System Diagnostics | 24 |
Diagnostic (L.E.D. Display) Failure Codes | 24 |
Technical Information | 25 |
List of Acronyms _____________________
DSI | Direct Spark Ignition |
HSI | Hot Surface Ignition |
in wc | Inches of Water Column |
L.E.D. | Light Emitting Diode |
L.P. | Liquid Propane |
OPL | |
OSHA | Occupational Safety and Health Administration |
T.E.F.C. | Totally Enclosed, |
450431 - 3 | www.amdry.com | 3 |