American Dryer Corp D3030 installation manual Type of GAS

Page 29

2.Technical Gas Data a. Gas Specifications

 

TYPE OF GAS

 

 

 

 

 

 

 

NATURAL

LIQUID PROPANE

 

 

 

 

 

Manifold Pressure*

3.5 inches W.C.

8.7 mb

10.5 inches W.C.

26.1 mb

 

 

 

 

 

In-Line Pressure

6.0 - 12.0 inches W.C.

14.92 - 29.9 mb

11.0 inches W.C.

27.4 mb

 

 

 

 

 

Shaded areas are stated in metric equivalents

*Measured at gas valve pressure tap when the gas valve is on.

b.Gas Connections

Inlet connection ----------- 1/2” N.P.T.

Inlet supply size ----------- 1/2” N.P.T. (minimum)

Heat input (per dryer) --- 78,000 Btu/hr (19,656 kcal/hr)

1)Natural Gas

Regulation is controlled by the dryer’s gas valve’s internal regulator. Incoming supply pressure must be consistent between a minimum of 6.0 inches (19.92 mb) and a maximum of 12.0 inches (29.9 mb) water column (W.C.) pressure.

2)Liquid Propane (L.P.) Gas

Dryers made for use with L.P. gas have the gas valve’s internal pressure regulator blocked open so that the gas pressure must be regulated upstream of the dryer. The pressure measured at each gas valve pressure tap must be a consistent 10.5 inches (26.2 mb) water column. There is no regulator or regulation provided in an L.P. dryer. The pressure must be regulated at the source (L.P. tank) or an external regulator must be added to each dryer.

 

 

 

TYPE OF GAS

 

Liquid

 

 

 

 

 

 

 

 

 

Propane

 

 

 

Natural

 

 

Liquid Propane

Btu/hr

kcal/hr

 

 

 

Conversion Kit

 

 

 

 

 

 

 

Rating

Rating

Qty.

D.M.S.*

 

Part No.

Qty.

D.M.S.*

Part No.

Part Number

 

 

 

 

 

 

 

 

 

 

78,000

19,656

2

#31

 

140818

2

#51

140801

883297

 

 

 

 

 

 

 

 

 

 

Shaded area is stated in metric equivalent

* Drill Measurement Size (D.M.S.) equivalents are as follows:

Natural Gas

#31

=

0.1200” (3.048 mm).

Liquid Propane Gas

#51

=

0.0670” (1.701 mm).

25

Image 29
Contents D30 Retain This Manual In a Safe Place For Future Reference For Your Safety Page Table of Contents Section Procedure for Functional Check Receiving and Handling Important InformationWhat to do if YOU Smell GAS Safety PrecautionsStandards Specifications SpecificationsSpecifications GAS, ELECTRIC, or Steam UNPACKING/SETTING UP Installation ProceduresLocation Requirements Dryer Enclosure Requirements Fresh AIR Supply Requirements Exhaust Requirements Single Dryer Venting Vertical Venting Multiple Dryer Common Venting Illus. C Important Venting Reminders Electrical Requirements Electrical InformationGAS and Steam KW Electric Page Single-Phase Electrical Lead Connections Page GAS Information Type of GAS Page Page Steam Information Operating Steam PressurePage Compressed AIR Supply AIR Pressure Page Page Preparation for OPERATION/START-UP GAS Models only Preoperational TestsBasket Tumbler Coating Preoperational InstructionsPage NON-COIN Models Shutdown Instructions Parts SERVICE/PARTS InformationService Warranty Warranty InformationReturning Warranty Cards Suggested Cleaning Schedule Routine MaintenanceCleaning Lubrication AdjustmentsLint Drawer Removal Data Label Information Serial Number Timing Legend Reversing Timer SPIN/DWELLADJUSTMENTSProcedure for Functional Check Replacement Components Page Sensor Activated Fire Extinguishing S.A.F.E. System F.E. System In ActionBefore YOU Start Check Local Codes and Permits InstallationTypical water supply Optional Manual Bypass System Reset F.E. System Solenoid Water Valve 24V 50/60 Hz 822752

D3030 specifications

American Dryer Corp D3030 is a state-of-the-art commercial dryer designed to meet the needs of high-demand laundry environments. Renowned for its efficiency, durability, and advanced technology, the D3030 has become a preferred choice among laundromats, hotels, and other facilities requiring reliable laundry solutions.

One of the standout features of the D3030 is its powerful drying performance. Equipped with a robust 30-pound capacity, it can effectively handle large loads, significantly reducing drying times and increasing productivity. The dryer utilizes a high-efficiency heat source that not only quickens the drying process but also conserves energy, making it an environmentally friendly option. The dual airflow system enhances drying efficiency by ensuring even heat distribution throughout the drum, resulting in thoroughly dried laundry every time.

The D3030 incorporates advanced technology for optimal control and user convenience. A digital control panel allows operators to easily select drying cycles, temperatures, and times, tailoring the process to the specific needs of various fabrics. The intelligent sensor system monitors moisture levels within the drum, adjusting the drying time accordingly. This feature not only prevents over-drying and fabric damage but also saves energy, making the dryer more cost-effective to operate.

Durability is another hallmark of the D3030. Constructed with heavy-duty materials, it is designed to withstand the rigors of daily use in high-traffic environments. The stainless-steel drum is both rust-resistant and easy to clean, ensuring a long operational lifespan. Its sturdy design minimizes vibration and noise, contributing to a quieter working environment.

Safety features are paramount in the D3030’s design. It includes a thermal fuse and other safety mechanisms to prevent overheating, giving operators peace of mind while using the dryer. Additionally, a large door with a secure latch allows for easy loading and unloading, enhancing user experience.

In summary, the American Dryer Corp D3030 is a powerful, efficient, and durable commercial dryer that excels in meeting the demands of any busy laundry operation. With its combination of advanced technology, customizable settings, and safety features, it offers a comprehensive solution for those seeking high-performance drying capabilities. The D3030 stands as a testament to American Dryer Corp's commitment to quality and innovation in the laundry industry.