American Dryer Corp D3030 installation manual Optional Manual Bypass

Page 56

OPTIONAL MANUAL BYPASS

Provisions are made in the dryer sensor activated fire extinguishing (S.A.F.E.) system for the installation of an optional manual bypass. Depending on the model dryer, the connections for the manual bypass are made at the “T” or “four way” fitting located in the outlet supply side of the water solenoid valve. The use and connections of this manual bypass are at the option or discretion of the owner.

The water connection for the manual bypass is made to the “T” or “four way” fitting which has a 3/8” F.P.T. and a coupling must be used to provide the minimum 1/2” supply (feed) line.

If the rear area of the dryer, or the water supply is located in an area where it will be exposed to cold/freezing temperatures, provisions must be made to protect these water lines from freezing.

WARNING: If the water in the supply line or water solenoid valve freezes, the S.A.F.E. system will be INOPERATIVE!!

The manual ball cock shutoff valve must be located outside of the dryer at a distance from the dryer where it is easily accessible.

3.Electrical Requirements

No independent external power source or supply connection is necessary. The 24 volt power to operate the S.A.F.E. system is accomplished internally in the dryer (from the dryer controls).

WARNING: Electrical power must be provided to the dryer at ALL times. If the main electrical power supply to the dryer is disconnected, the S.A.F.E. system is INOPERATIVE!!

52

Page 55 Page 57
Image 56
Page 55 Page 57
Contents D30 Retain This Manual In a Safe Place For Future Reference For Your Safety Page Table of Contents Section Procedure for Functional Check Important Information Receiving and HandlingSafety Precautions What to do if YOU Smell GASStandards Specifications SpecificationsSpecifications GAS, ELECTRIC, or Steam Installation Procedures UNPACKING/SETTING UPLocation Requirements Dryer Enclosure Requirements Fresh AIR Supply Requirements Exhaust Requirements Single Dryer Venting Vertical Venting Multiple Dryer Common Venting Illus. C Important Venting Reminders Electrical Information Electrical RequirementsGAS and Steam KW Electric Page Single-Phase Electrical Lead Connections Page GAS Information Type of GAS Page Page Operating Steam Pressure Steam InformationPage Compressed AIR Supply AIR Pressure Page Page Preparation for OPERATION/START-UP Preoperational Tests GAS Models onlyPreoperational Instructions Basket Tumbler CoatingPage NON-COIN Models Shutdown Instructions Parts SERVICE/PARTS InformationService Warranty Warranty InformationReturning Warranty Cards Suggested Cleaning Schedule Routine MaintenanceCleaning Adjustments LubricationLint Drawer Removal Data Label Information Serial Number Reversing Timer SPIN/DWELLADJUSTMENTS Timing LegendProcedure for Functional Check Replacement Components Page F.E. System In Action Sensor Activated Fire Extinguishing S.A.F.E. SystemInstallation Before YOU Start Check Local Codes and PermitsTypical water supply Optional Manual Bypass System Reset F.E. System Solenoid Water Valve 24V 50/60 Hz 822752

D3030 specifications

American Dryer Corp D3030 is a state-of-the-art commercial dryer designed to meet the needs of high-demand laundry environments. Renowned for its efficiency, durability, and advanced technology, the D3030 has become a preferred choice among laundromats, hotels, and other facilities requiring reliable laundry solutions.

One of the standout features of the D3030 is its powerful drying performance. Equipped with a robust 30-pound capacity, it can effectively handle large loads, significantly reducing drying times and increasing productivity. The dryer utilizes a high-efficiency heat source that not only quickens the drying process but also conserves energy, making it an environmentally friendly option. The dual airflow system enhances drying efficiency by ensuring even heat distribution throughout the drum, resulting in thoroughly dried laundry every time.

The D3030 incorporates advanced technology for optimal control and user convenience. A digital control panel allows operators to easily select drying cycles, temperatures, and times, tailoring the process to the specific needs of various fabrics. The intelligent sensor system monitors moisture levels within the drum, adjusting the drying time accordingly. This feature not only prevents over-drying and fabric damage but also saves energy, making the dryer more cost-effective to operate.

Durability is another hallmark of the D3030. Constructed with heavy-duty materials, it is designed to withstand the rigors of daily use in high-traffic environments. The stainless-steel drum is both rust-resistant and easy to clean, ensuring a long operational lifespan. Its sturdy design minimizes vibration and noise, contributing to a quieter working environment.

Safety features are paramount in the D3030’s design. It includes a thermal fuse and other safety mechanisms to prevent overheating, giving operators peace of mind while using the dryer. Additionally, a large door with a secure latch allows for easy loading and unloading, enhancing user experience.

In summary, the American Dryer Corp D3030 is a powerful, efficient, and durable commercial dryer that excels in meeting the demands of any busy laundry operation. With its combination of advanced technology, customizable settings, and safety features, it offers a comprehensive solution for those seeking high-performance drying capabilities. The D3030 stands as a testament to American Dryer Corp's commitment to quality and innovation in the laundry industry.
Top Page Image Contents