JVC KD-SX875, KD-SX975 manual Storing stations in memory, FM station automatic preset SSM

Page 7

Storing stations in memory

You can use one of the following two methods to store broadcasting stations in memory.

•Automatic preset of FM stations: SSM (Strong-station Sequential Memory)

•Manual preset of both FM and AM stations

FM station automatic preset: SSM

You can preset 6 local FM stations in each FM band (FM1, FM2 and FM3).

1 2

Select the FM band number (FM1, FM2 or

FM3) you want to store FM stations into.

FM1 FM2 FM3 AM

ENGLISH

Press and hold both buttons for more than 2 seconds.

“SSM” appears, then disappears when automatic preset is over.

Local FM stations with the strongest signals are searched and stored automatically in the band number you have selected (FM1, FM2 or FM3). These stations are preset in the number buttons — No. 1 (lowest frequency) to No. 6 (highest frequency).

When automatic preset is over, the station stored in number button 1 will be automatically tuned in.

Image 7

Contents Instructions ∂¥„ Ë´’¥How to reset your unit Contents CD Changer Operations Basic Operations Turn on the powerAdjust the volume Adjust the sound as you want see pages 15Start searching a station Radio OperationsListening to the radio Select the band FM1, FM2, FM3 or AMStoring stations in memory FM station automatic preset SSMPress and hold both buttons for more than 2 seconds Select the FM1 band Tune into a station of 88.3 MHz Manual presetRepeat the above procedure to store other Stations into other preset numbersSelect the number 1 6 for the preset station you want Tuning into a preset stationSelect the band FM1, FM2, FM3 or AM you want Scanning broadcast stations When an FM stereo broadcast is hard to receiveTo restore the stereo effect, press the same button again Other convenient tuner functionsClose the control panel by hand CD OperationsPlaying a CD Open the control panel Insert a disc into the loading slotTo go to a particular track directly Locating a track or a particular portion on a CDTo fast-forward or reverse the track To go to the next tracks or the previous tracksTo play back tracks at random Random Play Selecting CD playback modesTo play back tracks repeatedly Repeat Play To play back only intros Intro Scan Prohibiting CD ejectionAdjust the level Sound AdjustmentsAdjusting the sound Select the item you want to adjustTurning on/off the Bbeii function Selecting and storing the sound modes Using the Sound Control Memory SCMSelect the sound mode you want Indication For Preset valuesRecalling the sound modes Repeat the same procedure to store other settings Storing your own sound adjustmentsCall up the sound mode you want to adjust To adjust the bass or treble levelTo check the other information during play Setting the clockOther Main Functions DispBasic Procedure Changing the general settings PSMPress SEL Select when the setting is complete Selecting the level display Canceling Advanced SCMTurning on/off the key-touch tone Selecting the dimmer mode only for KD-SX975Selecting the external component to use Selecting the telephone mutingUnlock the control panel How to detach the control panelHow to attach the control panel Detaching the control panelReturn the battery holder Installing the batteryRemove the battery holder Place the batteryUsing the remote controller Playing CDs CD Changer OperationsSelect the CD automatic changer To go to a particular disc directly Mode RPT Indicator Plays repeatedly Mode RND Indicator Plays at randomMode Indication Plays the beginnings 15 seconds Select the external component Playing an external componentPreparations Handling CDs MaintenanceSymptoms Causes Remedies TroubleshootingFM Tuner SpecificationsAM Tuner تﺎﻤﻴﻠﻌﺘﻟا ﻞﻴﻟد Sound is distorted Fuse blowsUnit becomes hot 12V When installing the unit without using the sleeve??O?zU?Ðd?N?J? Place this unit Under the other equipment To prevent internal heat builtup inside this unit