JVC KD-SX875, KD-SX975 Selecting the telephone muting, Selecting the external component to use

Selecting the telephone muting

This mode is used when a cellular phone system is connected. Depending on the phone system used, select either “MUTING 1” or “MUTING 2,” whichever mutes the sounds from this unit. When shipped from the factory, this mode is deactivated.

•MUTING 1: Select this if this setting can mute the sounds.

•MUTING 2: Select this if this setting can mute the sounds.

• OFF: Cancels the telephone muting.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

2 Select “TEL (Telephone)” with ¢ or 4 .

3 Select the desired mode with the control dial. The telephone muting mode changes as follows:

MUTING 1 MUTING 2 OFF

ENGLISH

Selecting the external component to use

You can connect the external component to the CD changer jack on the rear using the Line Input Adaptor KS-U57 (not supplied).

To use the external component as the playback source through this unit, you need to select which component — CD changer or external component — to use. When shipped from the factory, CD changer is selected as the external component.

• LINE IN: To use the external component other than CD changer

• CHANGER: To use the CD changer

1.Change the source to FM, AM or CD with FM/AM or CD button.

2.Press and hold SEL (Select) for more than 2 seconds so that one of the PSM items appears on the display.

3.Select “EXT IN” with ¢ or 4 .

4.Select the desired mode with the control dial.

The external component selecting mode changes as follows:

LINE IN CHANGER

Note:

For connecting the Line Input Adaptor KS-U57 and the external component, refer to the Installation/ Connection Manual (separate volume).

25