Toshiba M1 manual Error code

3 Tests and Diagnostics 3.21 Bluetooth Test

If the machine detects a malfunction, it indicates the error code as shown below. The error code begins with the least significant digit.

Error code

Table 3-3	Error code for Bluetooth test (BD_ADDR of the DUT) (1/2)
Error code	Meaning
0x01	Unknown HCI Command.
0x02	No Connection.
0x03	Hardware Failure.
0x04	Page Timeout.
0x05	Authentication Failure.
0x06	Key Missing.
0x07	Memory Full.
0x08	Connection Timeout.
0x09	Max Number Of Connections.
0x0a	Max Number Of SCO Connections To A Device.
0x0b	ACL Connection already exists.
0x0c	Command Disallowed.
0x0d	Host Rejected due to limited resources.
0x0e	Host Rejected due to security reas ons.
0x0f	Host Rejected due to remote device is only a personal
	device.
0x10	Host Timeout.
0x11	Unsupported Feature or Parameter Value.
0x12	Invalid HCI Command Parameters.
0x13	Other End Terminated Connection: Uset Ended
	Connection.
0x14	Other End Terminated Connection:Low Resources.
0x15	Other End Terminated Connection: About to Power
	Off.
0x16	Connection Terminated by Local Host.
0x17	Repeated Attempts.
0x18	Paring Not Allowed.
0x19	Unknown LMP PDU.
0x1a	Unsupported Remote Feature.
0x1b	SCO Offset Rejected.
0x1c	SCO Interval Rejected.
0x1d	SCO Air Mode Rejected.
0x1e	Invalid LMP Parameters.
0x1f	Unspecified Error.

** See the Specification of the Bluetooth System for details.

3-60 TECRA M1 Maintenance Manual (960-436)