Toshiba M1 manual CardBus/16-bit

Use this setting when CardBus does not work properly in Auto-Selected”, or PC card supports 16-bit.

3.29 SETUP 3 Tests and Diagnostics

11.PCI Bus

This item displays the interrupt level for the Card Bus. It is for information only and cannot be changed.

PCI BUS = IRQ11

12.PC Card

This option sets the PC Card Controller mode. This option can be changed when “Device Config.” is set to “All Devices”.

Auto-SelectedUse this setting for all PC Cards when OS supports Plug&Play. (Default)

PCIC Compatible Use this setting for PCIC compatible PC card.

CardBus/16-bit

13.Peripheral

Use this option to select the parallel port mode and hard disk mode.

(a)Internal Pointing Device

This option enables and disables the Touch Pad.

Enabled Enables the Touch Pad. (Default)

Disabled Disables the Touch Pad.

(b)Ext Keyboard "Fn"

Use this option to set the Fn key equivalent when you are using an external keyboard. Selecting this option displays the following subwindow.

Enabled Enables the feature.

KEYBOARD

Ext Keyboard "Fn" key equivalent = Left Ctrl + Left Alt

Use this option to set a key combination on an external keyboard to emulate the Fn key on the computer's internal keyboard. Setting an Fn key equivalent will enable

TECRA M1 Maintenance Manual (960-436) 3-93