Toshiba M1 manual Select a drive number. Then the following message appears

3.27 Floppy Disk Drive Utilities 3 Tests and Diagnostics

4.DUMP program

(a)When DUMP is selected, the following message appears:

DIAGNOSTICS-HARD DISK & FLOPPY DISK DUMP : VX.XX

Drive type select (1:FDD, 2:HDD) ?

(b)When FDD is selected, the following message appears. Select a format type number. When HDD is selected, the display will go to step (g).

Select drive number (1:A, 2:B) ?

(c)Select a drive number and the following message will be displayed.

Format type select (1:2DD, 2:2HD) ?

(d)Select a media type number and the following message will appear:

Insert source disk into drive A:

Press any key when ready.

(e) Insert a source disk and press any key and the following message will appear:

--- Max. address ---

[ Track	] = XXXX
[ Head	]	=	XX
[ Sector	]	=	XX

Track number ??

(f)Set the track number, head number and sector number you want to dump. The system will access the disk and dump a list and the following message appears. Select 3 to end the list display.

Press number key (1:up, 2:down, 3:end) ?

(g) When HDD is selected in step (a), the following message appears.

Select drive number (1:C, 2:d) ?

(h) Select a drive number. Then the following message appears.

--- Max. address ---

[ LBA ] = XXXX LBA number ????????

(i)Enter a LBA number, Then the system accesses the disk and dumps a list.

(j)The following message appears. Select 3 to end the list display.

Press number key (1:up, 2:down, 3:end) ?

TECRA M1 Maintenance Manual (960-436) 3-75