GE 200D2463P002 Before you call for service…, Instructions Safety Instructions, Problem, setting

Models: 200D2463P002

1 92
Download 92 pages 46.98 Kb
Page 24
Image 24
Instructions Safety Instructions

Instructions Safety Instructions

Before you call for service…

Troubleshooting Tips

Save time and money! Review the charts on the following pages first and you may not need to call for service.

Problem

 

Possible CausesWhat To Do

 

 

 

 

Refrigerator does not

 

Refrigerator in defrost cycle.Wait about 40 minutes for defrost cycle to end.

operate

 

 

 

 

The controls are set toMove the refrigerator and freezer control to a

 

 

 

 

the O (off) position.temperature setting.

 

 

 

 

 

 

Refrigerator is unplugged.Push the plug completely into the outlet.

 

 

 

 

 

 

The fuse is blown/circuitReplace fuse or reset the breaker.

 

 

breaker is tripped.

 

 

 

 

 

Vibration or rattling

 

Rollers need adjusting.

See Rollers.

(slight vibration

 

 

 

is normal)

 

 

 

Instructions Operating

Motor operates for long periods or cycles on and off frequently. (Modern refrigerators with more storage space and a larger freezer require more operating time. They start and stop often to maintain even temperatures.)

Normal when refrigeratorWait 12–24 hours for the refrigerator to completely
is first plugged in.cool down.

 

 

Often occurs when largeThis is normal.
amounts of food are

 

placed in refrigerator.

 

 

 

Door left open.Check to see if package is holding door open.

 

 

Hot weather or frequent

This is normal.

door openings.

 

 

 

Temperature controls

See About the controls.

set at the coldest

 

setting.

 

Consumer Support Troubleshooting Tips Installation

Refrigerator or freezer

Temperature control not set

See About the controls.

compartment too warm

cold enough.

 

 

 

 

 

Warm weather or frequentSet the temperature control one step colder.

 

door openings.

See About the controls.

 

 

 

 

Door left open.

Check to see if package is holding door open.

 

 

 

Frost or ice crystals

Door left open.

Check to see if package is holding door open.

on frozen food

 

 

Too frequent or too long

 

(frost within package

 

door openings.

 

is normal)

 

 

 

 

 

 

Automatic icemaker

Icemaker power switchSet the power switch to the I (on) position.

(on some models)

is in the O (off) position.

 

does not work

 

 

Water supply turned off or

See Installing the water line.

 

 

not connected.

 

 

 

 

 

Freezer compartment

Wait 12–24 hours for the refrigerator to completely

 

too warm.

cool down.

 

 

 

 

Piled up cubes in the storageLevel cubes by hand.

 

bin cause the icemaker

 

 

to shut off.

 

 

 

 

 

Ice cubes stuck in icemaker.Turn off the icemaker, remove cubes and turn the

 

(Green power light onicemaker back on.

 

icemaker blinking.)

 

 

 

 

Frequent “buzzing”

Icemaker power switch is in theSet the power switch to the O (off) position. Keeping it

sound

I (on) position, but the water supplyin the I (on) position will damage the water valve.

 

to the refrigerator has not been

 

 

connected.

 

24

Page 24
Image 24
GE 200D2463P002 Before you call for service…, Instructions Safety Instructions, Instructions Operating, Problem, cool down