Instructions Operating Instructions Safety Instructions
About the shelves and bins.
Not all features are on all models.
Rearranging the Shelves
Shelves in the refrigerator and freezer compartments are adjustable.
Refrigerator Compartment
To remove:
Tilt the shelf up at the front.
Lift the shelf up at the back and bring the shelf out.
Some models have wire shelves that can be adjusted in the same manner.
To replace:
While tilting the shelf up, insert the top hook at the back of the shelf in a slot on the track.
Lower the front of the shelf until the bottom of the shelf locks into place.
Freezer Compartment
To remove:
Troubleshooting Tips Installation
Lift up the left side of the shelf and slide it left into the center of the shelf supports.
Rotate the right side of the shelf up and out of the shelf supports.
To replace:
Holding the shelf diagonally, insert the left end of the shelf into the center of the shelf supports on the side wall at the desired level.
Insert the right end of the shelf into the shelf supports at the same level. Rest each end of the shelf on the bottom of the shelf supports.
NOTE: For models with an automatic icemaker, the freezer shelf must be in the lower position for the ice cube bucket to catch the cubes.
Consumer Support
Spillproof Shelves (on some models)
Spillproof shelves have special edges to help prevent spills from dripping to lower shelves. To remove or replace the shelves, see Rearranging the Shelves.
6
