3.14 Expansion Test | 3 Tests and Diagnostics |
3.14 Expansion Test
To execute the expansion test, select 11 from the DIAGNOSTICS TEST MENU, press Enter and follow the directions on the screen. The expansion test contains two subtests.
NOTE: To execute this subtest, the PC card wraparound connector is required.
Subtest 01 PCMCIA Wraparound
This test checks the following signal line of the PC card slot:
qAddress line
qREG#, CE#1, CE#2 line
qData line
qSpeaker line
qWait line
qBSY#, BVD1 line
This subtest is executed in the following order:
Sub# | Address | Good | Bad | Contents |
|
|
|
|
|
01 | 00001 | nn | xx | Address line |
| 00001 | nn | xx | REG#, CE#1, CE#2 |
|
|
|
| nn=A0, 90, 80, 00 |
|
|
|
|
|
02 | 00002 | ww | rr | Data line |
|
|
|
| ww=write data, rr=read data |
|
|
|
|
|
03 | 00003 | Speaker line | ||
|
|
|
|
|
04 | 00004 | 40,80 | xx | Wait line (40<xx<80) |
|
|
|
|
|
05 | 00005 | nn | xx | Other lines (BSY#, BVD1) |
|
|
|
| NN=21, 00 |
|
|
|
|
|
NOTE: When the subtest 01 is executed, the following message will appear: Test slot number select (1:slot0, 2:slot1, 0:slot0&1)?
Select the slot to test.
Subtest 03 RGB monitor ID
TECRA M1 Maintenance Manual |
