Toshiba M1 manual Sound/Modem Test Tests and Diagnostics

3.19 Sound/Modem Test 3 Tests and Diagnostics

3.19 Sound/Modem Test

This section describes how to perform the Sound/Modem test with the test program.

CAUTION: The system is capable of producing high volume sound. When you use a headphone, be careful to set the volume low and adjust it as necessary. Using a headphone at full volume might damage your ears.

Toshiba MS-DOS is required to run the DIAGNOSTICS TEST PROGRAM. To start the DIAGNOSTIC TEST PROGRAM, follow these steps:

(a)Insert the test program disk in the floppy disk drive and turn on the computer. (The Diagnostics Disk contains the MS-DOS boot files.)

The following menu will appear:

########################################################################

#### XXXXXXXXXXX DIAGNOSTICS PROGRAM (SOUND/LAN/MODEM TEST) ####

########################################################################			*
*	1	( Microphoned Recording & play )
*			*
*	2	( Sin wave )	*
*	4	( MODEM )	*
*			*

************************************************************************

....Press test number [1-4] ? _

(b) To execute the TEST, select the option number you want to execute and press Enter.

TECRA M1 Maintenance Manual (960-436) 3-47