3 Tests and Diagnostics | 3.4 System Test |
3.4System Test
To execute the System Test select 1 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions on the screen. Move the highlight bar to the subtest you want to execute and press Enter.
Subtest 01 ROM Checksum
This subtest executes a checksum test of the BIOS ROM on the System Board.
Subtest 04 | Fan On/Off |
|
|
| This subtest checks CPU fan operation using the on/off command. The following | ||
| message will appear when this subtest is executed. Make sure the fan does not | ||
| rotate and press Enter. |
|
|
| *** Test Fan Revolution 0000RPM Start | ||
| The following message will appear. Make sure the fan rotates at low speed and | ||
| press Enter. |
|
|
| *** Test Fan Revolution Low speed start | ||
| The following message will appear. Make sure the fan rotates at high speed and | ||
| press Enter. |
|
|
| *** Test Fan Revolution High speed start | ||
Subtest 05 | Gerserville |
|
|
| If the CPU supports Gerserville (SpeedStep), this Subtest checks that the CPU | ||
| operating clock speed can be changed. | ||
Subtest 06 | Quick charge |
|
|
| This subtest checks the status for the quick charge. | ||
Subtest 07 | DMI read |
|
|
| Reads the factory setting for the serial and DMI numbers. | ||
| Model Name | : | XXXXXX |
| Version Number | : | |
| Serial Number | : | XXXXXXXXXX |
| Model Number | : | |
| PCN/BND Number | : | XXXXXXXXXXXXXXXXXXXX |
| UUID Number | : | XXXXXXXXXXXXXXXXXXXXXXXXX |
TECRA M1 Maintenance Manual (960 |
