4.12 Touch Pad 4 Replacement Procedures
TECRA M1 Maintenance Manual (960-436) 4-41
2. Disconnect the touch pad SUMI card from PJ2003 on the system board.
3. Remove the following screw securing the palm rest to the display assembly. Remove the
palm rest by rotating it up toward the front of the computer.
• M2.5×4 FLAT HEAD screw ×1
M2.5×4 FLAT HEAD screw
Palm rest
PJ2003
Touch pad SUMI card
Figure 4-21 Removing the Palm rest (2)