Toshiba M1 manual Pal

3.29 SETUP 3 Tests and Diagnostics

Built-in HDD → Second HDD → PC Card (Default)

Second HDD → Built-in HDD → PC Card

Built-in HDD → PC Card → Second HDD

Second HDD → PC Card → Built-in HDD

PC Card → Built-in HDD → Second HDD

PC Card → Second HDD → Built-in HDD

6.Display

This group of options configures the computer’s display.

(a)Power On Display

This option is used to select the display when booting up.

Auto-Selected	Selects an external monitor if one is connected. Otherwise it
	selects the internal LCD. (Default)
LCD+AnalogRGB	Selects both the internal LCD and the external monitor for
	simultaneous display.

NOTE: 1) When starting the computer in Resume mode, the last configuration is remembered. If data does not appear on the display you are using after starting in Resume mode, pressing Fn+F5.

2)Pressing Fn+F5 changes the display setting in the order of internal LCD to simultaneous to external monitor.

(b)TV Type

This option lets you make settings for television display.

NTSC(Default)

PAL

7.Others

Whether or not you need to configure the computer with these options depends primarily on the kind of software or peripherals you use.

(a)Power-up Mode

Use this option to choose between resume and boot mode. This option can also be set by hotkeys.

Boot	Turns on boot mode. (Default)
Resume	Turns on resume mode.

TECRA M1 Maintenance Manual (960-436) 3-87