4.5 HDD | 4 Replacement Procedures |
NOTE: The following steps describe how to disassemble the HDD pack; however, do not disassemble if the HDD is working properly.
5. Place the HDD pack on a flat surface, and remove the following screws.
∙ M3×4 FLAT screw | ×4 |
6. Remove the HDD bracket.
CAUTION: Do not apply pressure to the top or bottom of the HDD.
M3×4 FLAT screw
M3×4 FLAT screw
HDD bracket
Figure 4-6 Removing the HDD bracket
TECRA M1 Maintenance Manual |
