Toshiba M1 manual Replacement Procedures Memory Module, Removing a Memory Module

4 Replacement Procedures 4.10 Memory Module

4.10 Memory Module

Removing a Memory Module

To remove a memory module, make sure the computer is in boot mode and powered off, follow the steps below and refer to figure 4-18.

CAUTION: 1) Do not try to remove a memory module with the computer turned on. The computer or the memory might be damaged.

2)Do not touch the connectors on the memory module(s) or on the computer. Debris on the connectors may cause memory access problems.

1.Turn up the insulator covering the memory slots.

2.Press the two latches outward. One end of the memory module will pop up.

3.Grasp the memory module and pull it out to remove the memory module from PJ1001 (Slot

A)or PJ1002 (Slot B) on the system board.

Insulator

Latches

Memory slot A

Memory slot B

Memory module

Figure 4-18 Removing the Memory module

4-36 TECRA M1 Maintenance Manual (960-436)