Toshiba M1 manual Replacing Toshiba fluorescent lamp XGA

4 Replacement Procedure 4.25 Fluorescent Lamp

5.Removing PCB-ASSY cell

1)Remove the PCB-ASSY cell from the backlight unit.

2)Remove the double-sided adhesive tape from the back of the cell.

NOTE: 1) Remove the tape slowly not to break the cell. The cell and frame are glued by double-sided adhesive tape.

2)Be careful not to remove the light shielding tapes from the upper left and right sides of the cell.

PCB-ASSY cell

Remove the cell by peeling off the double- sided adhesive tape.

Backlight unit

Figure 4-55 Replacing TOSHIBA fluorescent lamp (XGA) (5)

4-92 TECRA M1 Maintenance Manual (960-436)