Toshiba M1 manual IEEE1394 Test Program Tests and Diagnostics

3.20 IEEE1394 Test Program 3 Tests and Diagnostics

3.20 IEEE1394 Test Program

This section describes how to perform the IEEE1394 test with the test program.

Toshiba MS-DOS is required to run the DIAGNOSTICS TEST PROGRAM. To start the DIAGNOSTIC TEST PROGRAM, follow these steps:

(a)Insert the Diagnostics disk in the floppy disk drive and turn on the computer. (The Diagnostics Disk contains the MS-DOS boot files.)

The following menu will appear:

***********************************************************************
*	------------------------------------------------------------				*
*		IEEE1394 [TSB!”LV28] test menu ( For Repair ) VX.XX			*
*	------------------------------------------------------------				*
*					*
*	============		Select test No. and [Enter]	============	*
*					*
*	1	: ... Ieee1384 test			*
*	2	: ... Responder tool			*
*	3	: ... ID Check			*
*					*

***********************************************************************

Select [1-3]?

(b) To execute the TEST, select the test number you want to execute and press Enter.

TECRA M1 Maintenance Manual (960-436) 3-51