Toshiba M1 manual Replacing Toshiba fluorescent lamp XGA

4.25 Fluorescent Lamp 4 Replacement Procedure

6.Sticking tapes and insulation sheets

1)Stick the Y-PCB insulation sheet and X-PCB insulation sheet in order.

2)Stick the two bezel tapes on the lower side (lamp side).

3)Stick the fixing tape for FL cable.

NOTE: Be careful not to damage to the TAB or the pulling-out part of lamp cable when sticking the tapes and insulation sheets.

	Stick the X-PCB	Stick the Y-PCB
	insulation sheet.
		insulation sheet.
Stick the insulation sheet
			Stick the insulation sheet
without any flexure.			without any flexure.

Bezel tape

Stick the bezel tape while pressing

not to cause floating of bezel.

Standard for sticking bezel tape. Stick the tape between the mark-off lines.

Standard for fixing tape for FL cable.

Fixing tape for FL cable

Standard for sticking bezel tape. Stick the tape between the mark-off lines.

Standard for sticking bezel tape. Stick the tape between the mark-off lines.

Figure 4-61 Replacing TOSHIBA fluorescent lamp (XGA) (11)

TECRA M1 Maintenance Manual (960-436) 4-99