Toshiba M1 manual Tests and Diagnostics Log Utilities

3 Tests and Diagnostics 3.25 Log Utilities

3.25 Log Utilities

3.25.1Function Description

This function logs error information generated while a test is in progress and stores the results in RAM. This function can store data on a floppy disk or output the data to a printer. If the power switch is turned off, the error information will be lost. The error information is displayed in the following order:

1.Error count (CNT)

2.Test name (TS -NAME)

3.Subtest number (TS -NAME)

4.Pass count (PASS)

5.Error status (STS)

6.FDD/HDD or memory address (ADDR)

7.Write data (WD)

8.Read data (RD)

9.HDC status (HSTS)

10.Error status name (ERROR STATUS NAME)

3.25.2Operations

Selecting 5 and pressing Enter in the DIAGNOSTIC MENU, logs error information into RAM or onto a floppy disk. The error information is displayed in the following format:

XXXXX ERRORS

CNT TS-NO PASS STS ADDR					WD RD HSTS		[ERROR STATUS NAME]
001 EXP01 0000 XXX 00000000 00 00 0000							FDD-WRITE PROTECTED
001 EXP03 0000 XXX 00000000 00 00 0000							FDD-TIME OUT ERROR
					Address
				Error status
								HDC status
			Pass count				Read data
		Subtest number							Error status name
						Write data
	Test name
Error count

[[1:Next,2:Prev,3:Exit,4:Clear,5:Print,6:FD Log Read,7:FD Log Write]]

3-68 TECRA M1 Maintenance Manual (960 -436)