Toshiba M1 manual Replacing Toshiba fluorescent lamp XGA

4 Replacement Procedure 4.25 Fluorescent Lamp

3.Folding and temporary fixing of TAB/PCB

1)Fold the X-TAB (X-PCB) and Y-TAB (Y-PCB) to the back of backlight unit.

2)Hook the X-PCB on the three latches on the back of frame.

NOTE: Be careful not to damage the TAB.

(1) Fold the X-PCB to the back.

(2) Fold the Y-PCB

to the back.
			Insert the FPC into the connector.
	The PCB shall be hooked on	the
	three latches of the frame.

The PCB shall not be installed over the frame.

Figure 4-58 Replacing TOSHIBA fluorescent lamp (XGA) (8)

4-96 TECRA M1 Maintenance Manual (960-436)