Toshiba M1 manual Replacing Sharp fluorescent lamp SXGA+

4 Replacement Procedure 4.25 Fluorescent Lamp

6. Install the lamp cover (F) and secure it with the two screws (E).

NOTE: Be careful not to make the lamp cover over the fitting pin. Around the pulling-out part of the lead wire, attach so that the P chassis is outside.

(E)	Screw tightening torque:
	∙	∙
	0.1176N m (1.2kgf cm)

(F) Lamp cover

(E)

Figure 4-67 Replacing Sharp fluorescent lamp (SXGA+) (6)

4-106 TECRA M1 Maintenance Manual (960-436)