3.21 Bluetooth Test | 3 Tests and Diagnostics |
Table
Error code | Meaning |
0x20 | Unsupported LMP Parameter Value. |
0x21 | Role Change Not Allowed. |
0x22 | LMP Response Timeout. |
0x23 | LMP Error Transaction Collosion. |
0x24 | LMP PDU Not Allowed. |
0x25 | Not Exist |
0x26 | Not Exis t |
0x27 | Not Exist |
0x28 | Not Exist |
0x29 | Not Exist |
0x2a | Not Exist |
0x2b | Not Exist |
0x2c | Not Exist |
0x2d | Not Exist |
0x2e | Not Exist |
0x2f | Not Exist |
** See the Specification of the Bluetooth System in detail.
Subtest 02 Communication test (DUT mode)
This subtest checks the Bluetooth communication functions. Preparing the tester machine for the Bluetooth test program. Insert a floppy disk containing the test program into the tester machine and turn on the tester machine. The Bluetooth test menu will appear:
Press 3 to select the test and press Enter in the target machine. The following message will appear:
When the test begins, the machine displays BD_ADDR of the DUT. The progress bar stops when the test is completed. The following message is displayed.
-
Bluetooth Subsystem T&D for
-
+ | + |
|
| |
DUT | BD_ADDR of the DUT = XXXXXXXXXXXXX [h] | |||
+ | + |
|
| |
| Ready>>>>>>>>>>>>>>>>>>>>>> | < - Progress Bar | ||
[ESC] : Stop
TECRA M1 Maintenance Manual |
