
4.6 Slim Select Bay Module | 4 Replacement Procedures |
4.6Slim Select Bay Module
Removing the Slim Select Bay Module
To remove the slim select bay module, follow the steps below and refer to figures
CAUTION: The slim select bay module can become hot with use. Be careful when removing the module.
1.Remove the following screw securing the slim select bay module from the screw hole for lock, and tighten the removed screw in the screw hole for release. (The slim select bay is unlocked.)
∙ M2.5×4 FLAT HEAD screw | ×1 |
TECRA M1 Maintenance Manual |