
4 Replacement Procedures | 4.12 Touch Pad | |||
4. | Remove the following screws securing the touch pad and touch pad switch to the palm rest. | |||
| ∙ | M2.5×4 | FLAT HEAD screw | ×2 |
| ∙ | M2.5×4 | TAPPING screw | ×2 |
5. | Remove the touch pad and touch pad switch from the front of the palm rest. |
Touch pad switch
Touch pad
Touch pad SUMI card
Palm rest
M2.5×4 FLAT HEAD screw
M2.5×4 TAPPING screw
Figure 4-22 Removing the Touch pad and Touch pad switch 6. Disconnect the touch pad SUMI card from CN1 on the touch pad.
TECRA M1 Maintenance Manual |