
3.6 Keyboard Test | 3 Tests and Diagnostics |
Subtest 03 | PS/2 Mouse Connect Check | |
|
|
|
|
| NOTE: To execute the PS/2 mouse connect check, a PS/2 mouse must be |
|
| connected to the computer before the power is turned on. |
|
|
|
| This subtest checks whether a PS/2 mouse is connected or not. | |
| If this test does not detect an error, it returns to the subtest menu. | |
| If this test detects an error, the following message appears. | |
| DATA COMPARE ERROR | |
|
| [[ HALT OPERATION ]] |
|
| 1: Test end |
|
| 2: Continue |
|
| 3: Retry |
Subtest 04 | Touch Pad/IPS | |
| This subtest checks the functions of the pointing stick as shown below. | |
| A) Touch Pad/IPS stick pressure sensing direction and parameter. | |
| B) Touch Pad/IPS switch function check. | |
| This test reports the pointing stick motion response from the IPS and IPS switch. | |
| When the stick is pressed towards the upper left, the <DIRECTION> display | |
| changes according to the following illustration. If an IPS switch is pressed, the | |
| <LAT> displays appear on the right side one by one. The parameters appear on | |
| the center of the display. To exit this subtest, press the four IPS switches at the | |
| same time. |
TECRA M1 Maintenance Manual |