Toshiba M1 manual Cpu, Replacement Procedures CPU, Removing the CPU

4 Replacement Procedures 4.8 CPU

4.8CPU

Removing the CPU

To remove the CPU, follow the steps below and refer to figures 4-11 to 4-13.

CAUTION: 1) The CPU can become very hot during operation. Be sure to let it cool before starting repair work.

2)When you remove the CPU, wipe the grease off of the bottom of the fin and top of the CPU. Apply new grease when installing.

1.Remove the following screws securing the CPU cover. Insert your finger into the slot and remove the CPU cover while supporting the “A” side in the figure below.

∙	M2.5×4	FLAT HEAD screw	×3
∙	M2.5×16	FLAT HEAD screw	×1

4-28 TECRA M1 Maintenance Manual (960-436)