4.22 FL Inverter4 Replacement Procedures
4.22 FL Inverter
Removing the FL Inverter
To remove the FL inverter, follow the steps below and refer to figure
1. Remove the following screw securing the FL inverter.
∙ M2×3 SUPER FLAT screw | ×1 |
2.Disconnect the FL cable under the insulator from the FL inverter.
3.Disconnect the HV cable from the FL inverter.
4.Remove the FL inverter.
M2×3 SUPER FLAT screw
FL inverter
FL cable
HV cable
Figure 4-38 Removing the FL inverter
TECRA M1 Maintenance Manual |
