Schneider Electric PM850, PM870, PM820 Power Meter Diagnostics, Accumulated Operating Time Reset

63230-500-225A2	PowerLogicTM Series 800 Power Meter
3/2011	Chapter 3—Operation

Accumulated Operating Time Reset

1.Press ###: to scroll through the Level 1 menu until you see MAINT.

2.Press MAINT.

3.Press RESET.

4.Press ###: until TIMER is visible.

5.Press TIMER.

6.Enter the password (the default is 0000).

7.Press YES to reset the accumulated operating time and to return to the RESET MODE screen.

NOTE: The accumulated days, hours, and minutes of operation are reset to zero when you press YES.

PLSD110284

Power Meter Diagnostics

To view the power meter’s model, firmware version, serial number, read and write registers, or check the health status, you must access the HEALTH STATUS screen.

After viewing a feature, you may continue through the remaining features by returning to the HEALTH STATUS screen and selecting one of the other options.

Once you have viewed the specific features, press 1; until the display returns to the main screen.

HEALTH STATUS screen

NOTE: The wrench icon and the health status code display when a health problem is detected. For code 1, set up the Date/Time (see “DATE Setup” and “TIME Setup” on pages 11 and 12). For other codes, contact technical support.

PLSD110191

© 2011 Schneider Electric. All Rights Reserved. 25