View the Meter Information | Schneider Electric PM870, PM820, PM810

PowerLogicTM Series 800 Power Meter	63230-500-225A2
Chapter 3—Operation	3/2011

View the Meter Information

1.Press ###: to scroll through the Level 1 menu until you see MAINT.

2.Press MAINT.

3.Press DIAG (diagnostics) to open the HEALTH STATUS screen.

4.On the HEALTH STATUS screen, press METER (meter information).

5.View the meter information.

6.Press ###: to view more meter information.

7.Press 1; to return to the HEALTH STATUS screen.

NOTE: The wrench icon and the health status code display when a health problem is detected. For code 1, set up the Date/Time (see “DATE Setup” and “TIME Setup” on pages 11 and 12). For other codes, contact technical support.

PLSD110094d

Read and Write Registers

1.Press ###: to scroll through the Level 1 menu until you see MAINT.

2.Press MAINT.

3.Press DIAG (diagnostics) to open the HEALTH STATUS screen.

4.On the HEALTH STATUS screen, Press REG (register).

5.Enter the password (the default is 0000).

6.Enter the REG. (register) number that contains the data you want to monitor.

The register content will be displayed in both HEX (hexadecimal) and DEC (decimal) values.

7.Press 1; to return to the HEALTH STATUS screen.

NOTE: For more information about using registers, see Appendix C—Using the Command Interface on page 83.

View the Meter Date and TIme

PLSD110194

1.	Press ###: to scroll through the Level 1 menu
	until you see MAINT.
2.	Press MAINT.
3.	Press DIAG (diagnostics) to open the HEALTH
	STATUS screen.
4.	On the HEALTH STATUS screen, press
	CLOCK (current date and time).
5.	View the date and time.
6.	Press 1; to return to the HEALTH STATUS
	screen.	PLSD110327
		PLSD110327

26	© 2011 Schneider Electric. All Rights Reserved.

Image 32

Schneider Electric PM870, PM820, PM810 View the Meter Information, Read and Write Registers, View the Meter Date and TIme

Contents

User Guide Page Hazard Categories and Special Symbols 63230-500-225A2 PowerLogicTM Series 800 Power Meter 2011 PowerLogicTM Series 800 Power Meter 63230-500-225A2 2011 Contents Maintenance and Troubleshooting Waveform CaptureDisturbance Monitoring PM870 Glossary What is a Power Meter? IntroductionTopics Not Covered In This Manual 2011 Introduction Power Meter Hardware Power Meter With Integrated DisplayPowerLogicTM Series 800 Power Meter Introduction 2011 Power Meter Without Display Parts of the Series 800 Power Meter without display Power Meter With Remote Display Parts of the remote display Description Power Meter Parts and Accessories Electric Box Contents Features Series 800 Power Meter FeaturesFirmware PM820 PM850 PM870 Introduction 2011 Schneider Electric. All Rights Reserved Safety Precautions 2011 Safety PrecautionsPage Power Meter Display OperationHow the Buttons Work Changing Values Level Date Setup Power Meter SetupSetup Mode Access Time Setup Lang Language Setup Comms Communications Setup Meter SetupCTs Setup Communications Default Settings Communications Setting SYS System Type Setup PTs SetupHZ System Frequency Setup Alarm Alarms Setup Input/Output Setup Passw Password Setup ROT Phase Rotation Setup Timer Operating Time Threshold SetupAdvan Advanced Power Meter Setup Features VAR/PF Convention Setup INC Incremental Energy Interval SetupTHD Calculation Setup Bar Graph Setup Lock Resets SetupAlarm Backlight Setup PQ Advanced Evaluation Setup Power Demand Configuration Setup Accumulated Energy Readings Reset Power Meter ResetsInitialize the Power Meter Display Mode Change Accumulated Demand Readings ResetMinimum/Maximum Values Reset Power Meter Diagnostics Accumulated Operating Time Reset View the Meter Date and TIme View the Meter InformationRead and Write Registers Metering Capabilities Real-Time Readings2011 Metering Capabilities One-second, Real-time Readings Reportable Range Power Factor Min/Max Conventions Min/Max Values for Real-time Readings Power Factor Sign Conventions Real Demand Readings Reportable Range Demand Power Calculation MethodsDemand Readings Sliding Block Fixed Block Demand Current Thermal Demand Example Predicted demand is updated every second Predicted DemandPeak Demand Generic Demand Input Metering Demand Pulse hour second Energy Readings Accumulated EnergyAccumulated Energy, Conditional Accumulated Energy, Incremental Energy-per-shift recorded values Category Recorded Values ConfigurationEnergy-Per-Shift PM810 with PM810LOG Power Analysis Values Values -3 to Default Fundamental Voltages per phase Fundamental Currents per phaseTHD-Voltage, Current Miscellaneous Input/Output Capabilities Digital Inputs Normal Demand Mode External Synch Pulse Demand Timing Demand Synch Pulse InputRelay Output Operating Modes Normal End Of Power Demand Interval LatchedTimed Absolute kWh Pulse Wire Pulse Initiator Solid-state KY Pulse OutputKWh Out Pulse KVARh Out Pulse Fixed Pulse Output Calculating the Kilowatthour-Per-Pulse Value = 0.1111 kWh/pulse Analog InputsAnalog Outputs Alarms Basic AlarmsBasic Alarm Groups 2011 Alarms Setpoint-driven Alarms EV2Max2EV1Max1 Max2 Types of Setpoint-controlled Functions Viewing Alarm Activity and HistoryPriorities Schneider Electric. All Rights Reserved Scale Factors Scale Groups Measurement Range Scale Factor Scaling Alarm Setpoints Alarm Conditions and Alarm NumbersScale Group Register Numbers Limit Standard Speed Alarms 1 Second Digital Standard Speed Advanced Alarms Advanced Alarm GroupsAdvanced alarm features by model PM850 PM870 Alarm Levels Abbreviated Test Display Name Register Nand 2011 Logging LoggingIntroduction Alarm Log Maintenance LogAlarm Log Storage Memory Allocation for Log Files Value Stored Number Data Logs Registers Alarm-driven Data Log Entries Billing LogOrganizing Data Log Files PM850, PM870 Data LogPage Data Type➀ Configure the Billing Log Logging Interval2011 Logging Billing Log Register List Description Page Waveform Capture Waveform Capture2011 Waveform Capture Number Channels How the Power Meter Captures an Event Channel Selection in PowerLogic SoftwareWaveform Storage Initiating a Waveform About Disturbance Monitoring 63230-500-225A2 PowerLogicTM Series 800 Power Meter 2011Disturbance Monitoring PM870 Plant B Transformer Plant C Plant D FaultPlant a 63230-500-225A2 PowerLogic TM Series 800 Power Meter 2011 Capabilities of the PM870 During an EventPage Date and Time Settings Maintenance and TroubleshootingPower Meter Memory Technical Support Identifying the Firmware Version, Model, and Serial NumberViewing the Display in Different Languages Troubleshooting Heartbeat LED CT and PT ratings, System Type, Nominal Using This Appendix What is Normal? Section I Common Problems for 3-Wire and 4-Wire Systems Section I-Case aSection I-Case B Section I-Case C Section II 3-Wire System Troubleshooting Section III 4-Wire System Troubleshooting Section III-Case aSection III-Case B Section III-Case C Section III-Case G Section III-Case ESection III-Case F Field Example Readings from a 4-wire systemTroubleshooting Diagnosis Register List Access Appendix B-Register ListAbout Registers Floating-point Registers How Signed Power Factor is Stored in the Register How Date and Time are Stored in RegistersTable B-1 Date and Time Format Table B-2 Date and Time Byte Example Supported Modbus Commands Resetting RegistersTable B-3 Modbus Commands Table B-4 Register Listing-Reset Commands Schneider Electric All Rights Reserved Appendix C-Using the Command Interface Overview of the Command Interface Command Issuing CommandsTable C-2 Command Codes Resets Files Operating Outputs from the Command Interface Setup9020 None Enter into setup mode 9021 8001 Exit setup mode and save all changes Conditional Energy To save the changes, write the value 1 to register Digital Input Control Command Interface ControlIncremental Energy Using Incremental Energy Figure C-2 Incremental energy example Setting Up Individual Harmonic Calculations Changing Scale Factors Enabling Floating-point RegistersPage Appendix D-Advanced Power Quality Evaluations Power Quality StandardsSEMI-F47/ITI Cbema Specification Table D-2 Duration categories Appendix D-Advanced Power Quality Evaluations PowerLogicTM Series 800 Power Meter 63230-500-225A2Table D-3 Categorized disturbance levels F-47 Sag levels Table D-4 Duration categories Table D-6 Register Entries Description Number EN501602000 SpecificationHow Evaluation Results Are Reported Possible Configurations Through Register Writes Power FrequencyEvaluation During Normal Operation1 Supply Voltage Variations Evaluations During Abnormal Operation Supply Voltage UnbalanceHarmonic Voltage Count of Magnitude of Rapid Voltage Changes Detection of Interruptions of the Supply Voltage Table D-8 Voltage dip classificationsTable D-9 Voltage interruptions Duration t seconds Table D-10 Over-voltages Duration t seconds Operation with PQ Advanced Enabled Resetting StatisticsHarmonic Calculations Time Intervals 100 Schneider Electric. All Rights Reserved Portal Registers Table D-12 Portal Register Descriptions Size Data101 Detection and Classification of Supply Voltage Dips on Detecting and Classifying Temporary Power Frequency Over 102 Schneider Electric. All Rights Reserved 103 Setting Up PQ Advanced Evaluation from the Display Alarms Allocated for PQ Advanced Evaluations Glossary Terms63230-500-225A2 3/2011 105 106 Schneider Electric. All Rights Reserved 107 Abbreviations and Symbols2011 Glossary 108 Schneider Electric. All Rights Reserved PowerLogicTM Series 800 Power Meter Index Index63230-500-225A2 3/2011 109 110 PLC 111 VAR 112Page PowerLogic Power Meter 800 User Guide