Operator's Manual | Second Edition • First Printing |
|
|
|
|
OPERATING INSTRUCTIONS
Platform Overload Indicator Light (if equipped)
Light flashing indicates the platform is overloaded and no functions will operate.
Remove weight from the platform until the light goes off.
Fall Protection
Personal fall protection equipment (PFPE) is required when operating this machine.
All PFPE must comply with applicable governmental regulations, and must be inspected and used in accordance with the PFPE manufacturer’s instructions.
Optional Drive System Operation
1Be sure the platform is fully lowered. The drive function will not operate unless the platform is fully lowered.
2Manually engage the drive wheels by pulling the drive wheel lever toward the tire on each side of the machine.
3Release the parking brake on the tongue.
ANSI, CSA and Australian models: Operate the drive system from the platform using the drive control box mounted next to the platform. Press and hold the blue function enable button. Press and hold the auto level button to raise the outriggers.
Note: The drive system control box can be detached from the machine and used while standing on the ground. Remove the drive control box from its mounting and step away from the machine to drive.
CE models: At the ground controls, press and hold the blue function enable button. Press and hold the auto level button or the individual outrigger buttons to raise the outriggers. Operate the drive controls from the ground using the control box mounted next to the ground controls. Remove the drive control box from its mounting and step away from the machine to drive.
4Press and hold the function enable button on the drive control handle.
5Move the drive control handle off center. Use the
6Before raising the platform, lower the outriggers and adjust to level the machine and raise the wheels off the ground.
Note: Use the bubble level to make sure the machine is level.
24 | Genie | Part No. 114164 |
