Operator's Manual | Second Edition • First Printing |
|
|
|
|
Pre-operation Inspection
Be sure that the operator's, safety and responsibilities manuals are complete, legible and in the storage container located on the platform.
Be sure that all decals are legible and in place. See Decals section.
Check for hydraulic oil leaks and proper oil level. Add oil if needed. See Maintenance section.
Check for battery fluid leaks and proper fluid level. Add distilled water if needed. See Maintenance section.
Check for proper tire pressure and lug nut torque. Add air to tires if needed. See Maintenance section.
Models with engines: Check for engine oil leaks and proper fluid level. Add oil if needed. See Maintenance section.
Check the following components or areas for damage, improperly installed or missing parts and unauthorized modifications:
Electrical components, wiring and electrical cables
Hydraulic power unit, reservoir, hoses, fittings, cylinders and manifolds
Boom components and wear pads
Tires and wheels
Trailer lights and reflectors
Parking brake components
Outriggers and foot pads
Limit switch and alarms
Nuts, bolts and other fasteners
Platform entry
Platform ladder (if equipped)
Surge brake components
Safety chains (if required)
Light and brake cables
Engine and related components (if equipped)
Mechanical brake components (if equipped)
Axle components
Beacon and alarms (if equipped)
Check entire machine for:
Cracks in welds or structural components
Excessive rust, corrosion or oxidation
Dents or damage to machine
Be sure that all structural and other critical components are present and all associated fasteners and pins are in place and properly tightened.
Be sure that the batteries are in place and properly connected.
Models equipped with hydraulic surge brake systems:
Check the hydraulic oil level in the surge brake. Check for leaks.
After you complete your inspection, be sure that all compartment covers are in place and latched.
12 | Genie | Part No. 114164 |
