American Dryer Corp D30 manual Hot Surface Ignition HSI Gas Burner Assembly

Hot Surface Ignition (HSI) Gas Burner Assembly 25

Illus. No.	Part No.	Qty.	Description
1	150301	1	#8-18 x 7/16” Phillips Pan Head TEK Screw
2	128920	1	Hot Surface Ignitor (HSI) 24V 2-1/2” Long
3	128921	1	Hot Surface Ignition (HSI) Flame Sensor
4	150309	7	#10-16 x 1/2” Hex Head TEK Crimptite Screw
5	141104	2	Small Tube Burner
6	150108	2	#8-32 x 1/2” Pan Head Machine Screw
7	130201	1	330º Hi-Limit with Manual Reset
8	151001	2	#8-32 Pal Nut
9	140818*	2	#31 Burner Orifice (natural gas)
	140801*	2	#51 Burner Orifice (liquid propane [L.P.] gas)
10	141230	1	1/2” Direct Spark Ignition (DSI) Manifold (2-port)
11	318700	3	Pipe Bracket (bent)
12	150300	7	#10-16 x 1/2” Hex Washer TEK Screw
13	128933	1	CE Gas Valve
	883255	1	CE 1/2” Liquid Propane (L.P.) Gas Valve
14	141314	1	90º x 1/2” x 1-1/2” Gas Shutoff Assembly
15	142800	1	1/2” x 18” Pipe
16	850894	1	Hot Surface Ignition (HSI) 15, 25 Burner Box ONLY
	817064**	1	Hot Surface Ignition (HSI) Burner Assembly (natural gas)
	817065**	1	Hot Surface Ignition (HSI) Burner Assembly (liquid propane [L.P.] gas)
	883297*	1	D-30 Liquid Propane (L.P.) Conversion Kit
	882604***	1	Steam to Gas Interface Plate
17	150001	2	Round Head Machine Screw
18	128975	1	CE Hot Surface Ignition (HSI) Module
19	810029	1	Hot Surface Ignition (HSI) Module Mounting Bracket Assembly
20	151000	4	#6-32 Pal Nut
21	154004	1	Twin Speed Nut
22	142935	1	1/2” BSPT x 1/2” N.P.T. Transition Coupling
23	802799	1	Sail Switch Top and Switch Bracket
24	150303	2	#4 x 3/4” Pan Head “A” Machine Screw
25	122200	1	SPST Sail Switch
26	105500	1	Sail Switch Actuator Rod
27	319202	1	Sail Switch Damper (flat)
28	154002	1	1/8” Push On Fastener
29	318202	1	Rear Burner Air Deflector
30	319704	1	Hi-Limit Mounting Bracket
31	150309	2	#10-16 x 1/2” Hex Head TEK Crimptite Screw

*Consult factory for elevations over 2,000 feet.

**Burner orifices are not included and must be ordered separately.

***Needed when converting steam heat to gas heat.