American Dryer Corp ML-175 manual Front Panel Assembly

4 Front Panel Assembly

Illus. No.	Part No.	Qty.	Description
1	--------	1	Cold Rolled Steel (CRS) Main Door
			(refer to Cold Rolled Steel [CRS] Main Door Assembly on page 5)
2	150443	2	1/4-20 x 3/4” Stainless Steel Cap Screw
3	--------	1	Bottom Hinge Block
			(refer to Main Door Switch Assembly on page 6)
4	153031	1	Nylon Washer
5	150443	2	1/4-20 x 3/4” Stainless Steel Cap Screw
6	--------	1	Top Hinge Block
			(refer to Main Door Switch Assembly on page 6)
7	882503	1	White Front Panel ONLY
	882504	1	Wrinkle Coral Blue Front Panel ONLY
8	122351	1	Large “EMERGENCY STOP” (E-Stop) Mushroom Head Switch
9	122419	1	“EMERGENCY STOP” (E-Stop) Nameplate
10	--------	1	Main Door Switch
			(refer to Main Door Switch Assembly on page 6)
11	132387	1	Normally Closed Contact Block
12	132395	1	Normally Closed Contact Block with Base
13	170330	1	Friction Door Latch
14	154215	2	5/32” Pop Rivet
15	150317	14	#10-16 x 3/4” TORX Plus Button Head Screw
			(for models mfd. as of September 29, 2000)
	150318	1	25 IP Stick Fit TORX Plus Bit (must be used to remove P/N 150317)
	150311	14	#10-16 x 3/4” Phillips Hex Head Screw
			(for models mfd. prior to September 29, 2000)

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781