OTHER MAIN FUNCTIONS
Setting the clock | 5 Finish the setting. |
You can also set the clock system to either 24 hours | S E L |
or 12 hours. |
|
ENGLISH
1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.
(See page 24.)
To check the current clock time (changing the display mode)
Press DISP (display) repeatedly. Each time you press the button, the display mode changes as follows:
S E L 
2 Set the hour.
1Select “CLOCK H (hour)” if not shown on the display.
2 Adjust the hour.
1 2
¢
4
3 Set the minute.
1 Select “CLOCK M (minute).”
2 Adjust the minute.
1 2
¢
4
4 Set the clock system.
1 Select “24H/12H.”
2 Select “24H” or “12H.”
1 2
¢
4
•During tuner operation:
Frequency 
Clock
Note:
For the indication change during RDS operation, see page 15.
•During CD operation:
Elapsed playing time 
Clock
•During power off
The power turns on, the clock time is shown for 5 seconds, then the power turns off.
Changing the general settings (PSM)
You can change the items listed on the next page
by using the PSM (Preferred Setting Mode) control.
Basic Procedure
1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.
(See page 24.)
S E L 
2 Select the PSM item you want to adjust. (See page 24.)
¢
4
CONTINUED ON THE NEXT PAGE
23