JVC KD-S871R, KD-S721R Using the Remote Controller, Installing the battery, Place the battery

Page 27

USING THE REMOTE CONTROLLER

This section is only for KD-S871R.

This unit can be remotely controlled as instructed here (with an optionally purchased remote

controller.) We recommend that you use remote controller RM-RK31 or RM-RK50 with your unit.

(Ex.: When you are using RM-RK31)

Before using the remote controller:

•Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no obstacle in between.

TP/PTY

SEL

DISP

7

8 MO

9

2.Place the battery.

Slide the battery into the holder with the + side facing upwards so that the battery is fixed in the holder.

Lithium coin battery (product number: CR2025)

3.Return the battery holder.

Insert again the battery holder pushing it until you hear a clicking sound.

(back side)

ENGLISH

Remote sensor

•Do not expose the remote sensor to strong light (direct sunlight or artificial lighting.)

Installing the battery

When the controllable range or effectiveness of the remote controller decreases, replace the battery.

1.Remove the battery holder.

1)Push out the battery holder in the direction indicated by the arrow using a ball-point pen or a similar tool.

2)Remove the battery holder.

(back side)

1)

2)

WARNING:

•Store the battery in a place where children cannot reach.

If a child accidentally swallows the battery, consult a doctor immediately.

•Do not recharge, short, disassemble or heat the battery or dispose it in a fire.

Doing any of these things may cause the battery to give off heat, crack or start a fire.

•Do not leave the battery with other metallic materials.

Doing this may cause the battery to give off heat, crack or start a fire.

•When throwing away or saving the battery, wrap it in tape and insulate; otherwise, the battery may start to give off heat, crack or start a fire.

•Do not poke the battery with tweezers or similar tools.

Doing this may cause the battery to give off heat, crack or start a fire.

CAUTION:

DO NOT leave the remote controller in a place (such as dashboards) exposed to direct sunlight for a long time.

27

Image 27

Contents KD-S871R KD-S723RKD-S721R Position And Reproduction Of Labels How to reset your unitContents Location of the Buttons Control panelDisplay window Basic Operations Turning on the powerTo drop the volume in a moment To turn off the powerFM1 FM2 FM3 Radio Basic OperationsListening to the radio Auto searchWhen an FM stereo broadcast is hard to receive Searching a station manually Manual searchTune in to a station you want while M is flashing 88.3 MHz FM station automatic preset SSMManual preset To store FM stations intoStation you want Select the number 1 6 for the presetRDS Operations What you can do with RDSTo use Network-Tracking Reception To deactivate the TA Standby Reception, press Using TA Standby ReceptionTo deactivate the PTY Standby Reception Using PTY Standby ReceptionPress and hold TP/PTY for more than Searching your favourite programmeTo store your favourite programme types Press and hold TP/PTY for more than SecondsSelect one of the PTY codes To search your favourite programme typeSeconds while listening to an FM StationSetting the TA volume level Automatic clock adjustmentChanging the display mode while listening to an FM station Science PTY codesInsert a disc into the loading slot CD OperationsPlaying a CD To stop play and eject the CDTo go to a particular track directly To fast-forward or reverse the trackTo go to the next tracks or the previous tracks To play back tracks at random Random PlayWhile pressing CD, press and hold 0 for more than 2 seconds To cancel the prohibition and unlock the CDProhibiting CD ejection To play back tracks repeatedly Repeat PlaySelect the item you want to adjust Sound AdjustmentsAdjusting the sound Adjust the levelRecalling the sound modes Using the sound control memory SCMWhen SCM Link is set to Link ON, select the source Select the sound mode you wantRepeat the same procedure to store other sound modes Storing your own sound adjustmentsTo reset to the factory settings Call up the sound mode you want to adjustTo check the current clock time changing the display mode Setting the clockChanging the general settings PSM Basic Procedure24H/12H Preferred Setting Mode PSM itemsTo select the level meter Level To cancel Advanced SCM SCM LinkSelect the color you want to adjust Selecting the color of the display windowAttaching the control panel Detaching the control panelReturn the battery holder Using the Remote ControllerInstalling the battery Place the batteryRM-RK31 Location of the buttonsHandling CDs MaintenanceSymptoms Causes Remedies TroubleshootingLW Tuner SpecificationsFM Tuner MW TunerHaving Trouble with operation?