American Dryer Corp MDG50MNV, MDG50PNH installation manual GAS Information

Page 23

G. GAS INFORMATION

It is your responsibility to have ALL plumbing connections made by a qualified professional to ensure that the gas plumbing installation is adequate and conforms to local and state regulations or codes. In the absence of such codes, ALL plumbing connections, materials, and workmanship must conform to the applicable requirements of the National Fuel Gas Code ANSI Z223.1-LATEST EDITION, or in Canada, the Canadian Installation Codes CAN/CGA-B149.1-M91 (Natural Gas) or CAN/CGA-B149.2-M91 (Liquid Propane [L.P.] Gas) or LATEST EDITION.

IMPORTANT: Failure to comply with these codes or ordinances, and/or requirements stipulated in this manual, can result in personal injury and improper operation of the dryer.

The dryer and its individual shutoff valves must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures in excess of 1/2 psig (3.5 kPa). The dryer must be isolated from the gas supply piping system by closing its individual manual shutoff valve during any pressure test of the gas supply piping system at test pressures equal to or less than 1/2 psig (3.5 kPa).

IMPORTANT: Failure to isolate or disconnect the dryer from supply as noted can cause irreparable damage to the gas valve, which will VOID THE WARRANTY.

WARNING: FIRE OR EXPLOSION COULD RESULT DUE TO FAILURE OF ISOLATING OR DISCONNECTING THE GAS SUPPLYAS NOTED.

1.Gas Supply

The gas dryer installation must meet the American National Standard...National Fuel Gas Code ANSI Z223.1-LATEST EDITION, or in Canada, the Canadian Installation Codes CAN/CGA-B149.1 M91 (Natural Gas) or CAN/CGA-B149.2-M91 (L.P. Gas) or LATEST EDITION, as well as local codes and ordinances and must be done by a qualified professional.

NOTE: Undersized gas piping will result in ignition problems, slow drying, increased use of energy, and can create a safety hazard.

The dryer must be connected to the type of heat/gas indicated on the dryer data label. If this information does not agree with the type of gas available, DO NOT operate the dryer. Contact the dealer who sold the dryer or contact the Maytag Co.

IMPORTANT: Any burner changes or conversions must be made by a qualified professional.

The input ratings shown on the dryer data label are for elevations up to 2,000 feet (610 meters), unless elevation requirements of over 2,000 feet (610 meters) were specified at the time the dryer order was placed with the factory. The adjustment or conversion of dryers in the field for elevations over 2,000 feet (610 meters) is made by changing each burner orifice. If this conversion is necessary, contact the Maytag dealer who sold the dryer.

19

Page 22 Page 24
Image 23
Page 22 Page 24
Contents MDG50PNH / MDG50MNV Retain This Manual In a Safe Place For Future Reference For Your Safety Page Table of Contents Section Procedure for Functional Check of Replacement Section Safety PrecautionsPage Cu m SpecificationsSpecifications UNPACKING/SETTING UP Installation ProceduresLocation Requirements Dryer Enclosure Requirements Fresh AIR Supply Requirements Exhaust Requirements Single Dryer Venting Vertical Venting Multiple Dryer Common Venting Illus. C Electrical Requirements Electrical InformationGAS Single-Phase Electrical Lead Connections GAS Information Type of GAS Page Page Preparation for OPERATION/START-UP GAS Models only Preoperational TestsBasket Tumbler Coating Preoperational Instructions NON-COIN ModelsShutdown Instructions Dual Timer DryersReversing Timer SPIN/DWELL Adjustments Parts SERVICE/PARTS InformationService Warranty Warranty InformationReturning Warranty Cards Suggested Cleaning Schedule Routine MaintenanceCleaning Lubrication AdjustmentsLint Drawer Removal Data Label Information SectionviiSectionviii Procedure for Functional Check Replacement ComponentsPage Page Dual Timer Manual Reset Burner HI-LIMIT InstructionsPhase Sensoractivated Fire Extinguishing S.A.F.E. System F.E. System In ActionBefore YOU Start Check Local Codes and Permits InstallationTypical water supply Optional Manual Bypass F.E. System Theory of Operation F.E. System Diagnostics Page 09/16/08

MDG50MNV, MDG50PNH specifications

American Dryer Corp has established itself as a leader in the commercial laundry equipment industry, and their MDG50PNH and MDG50MNV models exemplify their commitment to quality, efficiency, and innovation. Designed for high-performance operation, these dryers cater to the needs of laundromats, hotels, health facilities, and other commercial establishments requiring reliable and effective drying solutions.

One of the standout features of the MDG50PNH and MDG50MNV is their robust construction. Built with heavy-duty steel, these dryers are engineered to withstand the rigors of a busy laundry environment. The exterior is finished with a corrosion-resistant powder coating, ensuring long-lasting durability and minimal maintenance. The large, stainless steel doors provide ease of access, making loading and unloading laundry effortless.

In terms of performance, these dryers showcase an impressive drying capacity, accommodating large loads efficiently. This is made possible by their powerful heating elements, which provide rapid and consistent heat distribution. The MDG50 series also includes advanced airflow technology, ensuring that hot air circulates effectively throughout the drum. This not only enhances drying efficiency but also minimizes energy consumption, making these models eco-friendly options for commercial laundry operations.

The MDG50PNH and MDG50MNV models are equipped with user-friendly controls that simplify operation. With intuitive digital displays, operators can easily select drying cycles, adjust temperature settings, and monitor remaining drying time. The models feature several programmable settings, allowing users to customize cycles based on specific fabric types or drying requirements. Additionally, these dryers come with a lint filter system designed to trap lint effectively, enhancing performance and safety.

Another notable characteristic is their quiet operation. Designed with noise-reduction technologies, these dryers minimize sound levels, making them suitable for establishments where noise can be a concern. Furthermore, both models have safety features such as door switches and over-temperature protection, ensuring safe operation for users.

In conclusion, the American Dryer Corp MDG50PNH and MDG50MNV models are excellent choices for commercial laundry applications. Their combination of durability, efficiency, and user-friendly features makes them stand out in the marketplace. Whether it's for a bustling laundromat or a high-demand hotel, these dryers deliver the performance and reliability necessary to meet the demands of everyday laundry operations. With their innovative technology and thoughtful design, American Dryer Corp continues to set a high standard in the industry.
Top Page Image Contents