Troubleshooting, Changing the Drum Light | Amana W10216187A instruction

Moving care

1.Unplug the power supply cord.

2.Close shutoff valve in gas supply line.

3.Disconnect gas supply line pipe and remove fittings attached to dryer pipe.

4.Cap the open fuel supply line.

5.Make sure leveling legs are secure in dryer base.

6.Use masking tape to secure dryer door

Changing the Drum Light

The dryer light automatically turns on inside the dryer drum when you open the door.

To change the drum light

1.Unplug dryer or disconnect power.

2.Open the dryer door. Locate the light bulb cover on the back wall of the dryer. Remove the screw located in the lower right corner of the cover. Remove the cover.

3.Turn bulb counterclockwise. Replace the bulb with a 10-watt appliance bulb only. Replace the cover and secure with the screw.

4.Plug in dryer or reconnect power.

TROUBLESHOOTING

First try the solutions suggested here and possibly avoid the cost of a service call...

Dryer Operation

Dryer will not run

■Has a household fuse blown, or circuit breaker tripped? Replace the fuse or reset the circuit breaker. If the problem continues, call an electrician.

■Was a regular fuse used? Use a time-delay fuse.

■Is the dryer door firmly closed?

■Was the Start button firmly pressed?

Large loads may require pressing and holding the Start button for 2-5 seconds.

No heat

■Has a household fuse blown, or has a circuit breaker tripped?

The drum may be turning, but you may not have heat. Replace the fuse or reset the circuit breaker. If the problem continues, call an electrician.

■Is the valve open on the gas supply line?

■Is a coin, button, or paper clip caught between the drum and front or rear of the dryer?

Check the front and rear edges of the drum for small objects. Clean out pockets before laundering.

■Are the four legs installed, and is the dryer level front to back and side to side?

The dryer may vibrate if not properly installed. See the Installation Instructions.

■Is the clothing knotted or balled up? When balled up, the load will bounce, causing the dryer to vibrate. Separate the load items, and restart the dryer.

Dryer displaying code message

■“PF” (power failure), check the following:

Was the drying cycle interrupted by a power failure? Press and hold START to restart the dryer.

■“F” Variable (F1, F2, F20) service codes: Call for service.

Unusual sounds

■Has the dryer had a period of non-use?

If the dryer hasn’t been used for a while, there may be a thumping sound during the first few minutes of operation.

■Is it a gas dryer?

The gas valve clicking is a normal operating sound.

W10216187A specifications

The Amana W10216187A is a highly regarded appliance that offers innovative design and advanced technology to enhance your laundry experience. This washing machine is designed to cater to a variety of needs, making it an ideal choice for households of all sizes.

One of the standout features of the Amana W10216187A is its high-efficiency washing capabilities. With a large capacity drum, this washing machine can handle larger loads, reducing the number of cycles needed to complete laundry chores. This means less time spent washing and more time for other activities, making it a time-saving solution for busy families.

The user-friendly interface of the Amana W10216187A is another highlight, featuring intuitive controls that allow for easy navigation through various washing settings. With multiple wash cycles and options available, users can select the best setting for different types of fabrics and soil levels, ensuring optimal care for clothes while achieving excellent cleaning performance.

The Amana W10216187A also incorporates advanced wash technology, such as the Dual Action Agitator. This unique feature provides a combination of rolling and lifting motions, allowing for deeper cleaning without damaging clothes. It ensures that even the most stubborn stains are effectively removed, while still being gentle on delicate items.

In terms of energy efficiency, the Amana W10216187A is designed to consume less water and power compared to traditional washing machines. This not only contributes to lower utility bills but also promotes a more sustainable lifestyle. The machine is Energy Star certified, meaning it meets strict energy efficiency guidelines set by the U.S. Environmental Protection Agency.

Additionally, this model is equipped with a reliable spin cycle that helps reduce drying time. By effectively removing more water from clothes, the Amana W10216187A ensures that laundry comes out drier, allowing for quicker transition to the drying phase.

The design of the Amana W10216187A is both sleek and practical. Its modern appearance fits well in various laundry room aesthetics, while its construction is durable and built to withstand daily use. Overall, the Amana W10216187A combines advanced technology, user-friendly features, and efficient performance, making it a top choice for anyone in need of a dependable washing solution. With this machine, laundry has never been easier or more efficient.