Indication | For: | Preset values | ||
|
|
|
|
|
|
| BAS | TRE | LOUD |
|
|
|
|
|
SCM OFF | (Flat sound) | 00 | 00 | OFF |
|
|
|
|
|
BEAT | Rock or | +02 | 00 | ON |
| disco music |
|
|
|
|
|
|
|
|
SOFT | Quiet | +01 | OFF | |
| background |
|
|
|
| music |
|
|
|
|
|
|
|
|
POP | Light music | +04 | +01 | OFF |
|
|
|
|
|
Notes:
•You can adjust each sound mode to your preference, and store it in memory.
If you want to adjust and store your original sound mode, see “Storing your own sound adjustments” below.
•To adjust the bass and treble reinforcement levels or to turn on/off the loudness function, see page 20.
3 Adjust the bass or treble, or turn the loudness function on/off (LOUD ON/ LOUD OFF).
4 Repeat steps 2 and 3 to adjust the other items.
5
SCM | Your adjustment made for the |
| |
| selected sound mode is stored |
| in memory. |
ENGLISH
Storing your own sound adjustments
You can adjust the sound modes (BEAT, SOFT, POP) to your preference and store your own adjustments in memory.
•There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.
1 Call up the sound mode you want to adjust.
SCM | • See page 20 for details. |
|
2 Select “BAS” (bass), “TRE” (treble), or “LOUD” (loudness).
SEL
6 Repeat the same procedure to store other sound modes.
To reset each sound mode to the factory
settings, repeat the same procedure and reassign the preset values listed in the table on the left column.
21