Care and cleaning
Cleaning the fluff filter
The fluff filter must be cleaned after each load.
If you have very hard water, this can cause limescale deposits in the fluff filter. Check for any limescale deposits when cleaning the fluff filter and, if necessary, wash down the filter by hand.
1.Grasp the filter handle and pull it towards you.
2.Pull the filter out of its holder.
Cleaning the outside of the machine
Clean the outside of the machine and the programme panel with a mild cleaner. Do not use any solvents, as these can damage the machine. Do not hose down or spray the machine with water.
Note!
Do not allow dust to accumulate around the machine. Keep the area around the tumble dryer clean and cool; dust, heat and mois- ture prolong drying times.
2
1
3.Open the filter and remove the fluff from all sides by hand. Use a soft dry cloth to remove any coating.
4. Replace the filter in its holder.
Note!
If you have hard water, the filter should be washed down with water to get rid of any limescale deposits.
Dry the filter carefully with a towel.
13