Electrical installation
The machine must only be connected to an earthed wall socket.
Connection on delivery
The machine is supplied as
Alternative connection
It is possible to switch over from 16A (heat output 2500) to 10A (heat output 1950W). Switching must be carried out as follows:
1.Shut off the power.
2.Press and hold the Start/Stop button, and switch on the power.
3.Release the Start/Stop button once the programme indicator lights up.
4.Press the Start/Stop button 5 times (within 10 seconds).
5.Adjust the programme selector so that the Extra Dry light comes on (10 o’clock).
6.Press the Start/Stop button to store the setting.
If you want to reset the machine to a 16A connection:
1.Repeat steps
2.In step 5, adjust the programme selector so that the Extra Dry light goes out.
3.Press the Start/Stop button to store the setting.
The machine now has a 16A connection.
21