Maytag MDE9601 operating instructions Troubleshooting, Machine will not start, Overheating cut-out

Page 14

Troubleshooting

The machine will not start

Check

that the outer door is properly closed

that the main power switch is pressed

that you have set the programme correctly

that the Delayed Start option has not been selected. If so, the time remaining until start will be shown in full hours in the display (e.g. 5, 4, 3h). To cancel the programme, see page 10

that any plug is connected

that your home’s fuses (circuit breakers) are intact, swap two circuit breakers.You cannot always tell from outside if a circuit breaker is broken

that the overheating cut-out has not been triggered (see below).

Overheating cut-out

The overheating cut-out shuts off the tum- ble dryer if the temperature is too high, e.g. because dust is clogging the fluff filter.

Clean the filter.

The overheating cut-out will reset auto- matically once the machine has cooled.

Drying takes too long

Make sure that the tumble dryer has ac- cess to more cold air, e.g. by opening doors and/or windows.

14

Image 14
Contents Operating Instructions Tumble dryer Contents See the Quick guide on the last Before using your machine for the first timeDo not tumble-dry Safety instructions Child safety Do not allow children to play with the tumble dryerParts of the tumble dryer Front panel Options buttonsLaundry labels Advice and tips before you tumble-dryHas it been spun? Materials that must not be tumble-driedSort your fabrics Turn on the main power switchTumble-drying Select programmePress the Start button Page Programme Material Temperature Approx. kWh Time approx. min Consumption valuesCleaning the outside of the machine Care and cleaningCleaning the fluff filter Overheating cut-out TroubleshootingMachine will not start Drying takes too longStandard tests Technical dataTechnical information Service Before contacting the service divisionInstallation Positioning the tumble dryerConnection to the tumble dryer Adjusting the feetAir evacuation Installation in a hot environment Connection to evacuation ductAccessories Alternative connection Electrical installationConnection on delivery Door hanging Proceed as followsPage Own notes Own notes Own notes Search words Press the Start/Stop button Drying programme finished Quick guideSelect a programme and any options Once tumble-drying has finished