Maytag MD-16 warranty Dryer Exhaust Tips, Don’t

Page 4

DRYER EXHAUST TIPS

WARNING — Plastic or nonmetal flexible duct presents a potential fire hazard.

Let your dryer

exhaust the air easily.

Keep duct runs

as straight as

possible.

Use 4 inch diameter

rigid metal duct. Tape all joints, including at the dryer. Never use lint-trapping screws.

Clean all old ducts before installing your new dryer. Be sure vent flap opens and closes freely. Inspect and clean the exhaust system annually.

Let a poor exhaust system cause slow drying.

Restrict your dryer with a poor exhaust system.

Don’t

Use longer than necessary duct runs

with many elbows.

Don’t

Use plastic, thin foil, or non-metal flexible duct.

Don’t

Allow crushed or clogged ducts and vent.

Image 4

Contents Intellidry Dryer MD-16 Important Safety Instructions Clean the lint screen before or after each loadDo not reach into the appliance if the drum is moving Do not tamper with controlsRecognize safety symbols, words, labels Important safety notice & warningDryer Exhaust Tips Don’tClean the lint filter By placing only one wash load in the dryer at a timeSelect cycle Intellidry Wrinkle Free FabricsSelect options Press startUsing the Dryel Setting select models Refer to the Dryel instructions for proper useReplacing the Drum Light Cabinet wipe off any marks with soap and waterRemove from socket Screw hole Remove the hinge hole covers and screwsSpecial Laundry Tips Before YOU Call Be sure the door is latched shutCheck the home’s circuit breaker and fuses Check all of the above, plusTo receive warranty service Clothes Dryer Warranty