Step 2 Select temperature
REGULAR – for sturdy cottons or those | DELICATE – for heat sensitive items |
labeled “Tumble Dry”. | labeled “Tumble Dry Low” or “Tumble Dry |
MEDIUM – for permanent press, synthetics, | Warm”. |
| |
lightweight cottons or items labeled “Tumble | AIR FLUFF – tumbles without heat. Used for |
Dry Medium”. | sensitive loads or items needing freshening. |
|
|
Step 3 Select options
EXTRA LOW TEMP ON* – overrides the Regular, Medium or Delicate temperature selections, providing the lowest heated dry temperature possible. EXTRA LOW TEMP temperature is lower than DELICATE. (EXTRA LOW TEMP will not override the AIR FLUFF setting).
EXTRA LOW TEMP OFF – allows for full temperature range of Regular through Delicate.
PRESS CARE ON – provides approximately 20 minutes of tumbling in unheated air after the Wrinkle Free Fabrics cycle to further min- imize wrinkling.
PRESS CARE OFF – cancels the additional tumbling in unheated air.
EXTRA
LOW TEMP
*The EXTRA LOW TEMP light will illumi- nate when the EXTRA LOW TEMP ON option is selected with Regular, Medium or Delicate temperatures.
Step 4 End of cycle signal
Shortly before the
cycle is complete, an audible signal will sound. If the Press Care option has been selected, the
audible signal will
sound intermittently during the cool down portion of Press Care. The signal can be turned off if desired.
Step 5 Press start
Push this button to start the dryer. The dryer door must be shut for the dryer to operate. If the door is opened during the cycle, the start button must be pushed again to resume the cycle once the door is closed.
6