OPERATING TIPS
Clean the lint filter
•After each load.
•To shorten drying time.
•To operate more efficiently.
NOTE:
Do not operate the dryer without the lint filter in place.
Load the dryer properly
•By placing only one wash load in the dryer at a time.
•Avoid very small loads or mixing heavy- weight and lightweight clothes.
•When only one or two articles need dry- ing, add a few similar items to improve tumbling and drying efficiency.
•When drying large, bulky items such as a blanket or comforter, it may be neces- sary to reposition the load during the cycle to ensure even drying.
Check the moisture monitor
Indicator lights in the moisture monitor will display when an IntelliDry cycle is in opera- tion. The top light will blink on and off. As loads dry, there will be longer pauses between each blink. No lights will display during Time Dry or Air Fluff.
The bottom light in the monitor will remain on until the cool down portion of the cycle starts. During cool down the dryer continues to tumble the load in unheated air to help minimize wrinkling.
NOTE: The top monitor light may not blink when small loads of heavy, bulky items are dried, such as rugs or sweaters.
Add a fabric softener sheet (if desired)
•After loading the dryer.
•To control static cling.
•Before the load becomes warm. This helps prevent
•And remove any used softener sheets from the dryer to prevent
4