Whirlpool 8318507 Recessed area Or closet, Drain system, Floor standpipe drain

Recessed area

or closet

The installation dimensions shown are the minimum spaces allowable. Additional spacing should be considered for ease of installation and servicing.

If closet door is installed, the minimum air openings in top and bottom of door are required. Louvered doors with air openings in top and bottom are acceptable.

Companion appliance spacing should be considered.

* Additional clearances for wall, door and floor moldings may be	*
required.

Front view

Side view

Front view (door not shown)

closet door

310cm2

(48 in2)

7.6 cm (3")

43.2 cm (17")

7.6 cm (3")

closet door

310 cm2

(48 in2)

155 cm2

(24 in2)

35.6cm

max.

(14" max.)

10.2cm

(4") min.

155cm2

(24 in2)

*0 cm		*0 cm	2.5 cm min.
(*0")	(*0")
			(1" min.)

Drain system

A

Untape and open washer lid. Remove packages and hoses from washer. Follow directions for your type of drain system.

If a longer drain hose is needed, use drain hose extension kit (Part No. 285702). If drain hose must be shortened, use drain hose kit (Part No. 285442).

All kits are available from Whirlpool-authorized parts distributors.

Laundry tub drain system:

Needs a 76-liter (20-gallon) laundry tub.

Top of tub must be at least 86 cm (34 inches) high and no higher than 183 cm (72 inches) from bottom of washer (A).

285702285442

76

(A)

86 183

B	Floor drain system:
	Requires a siphon break, Part No. 285320 (B). Siphon break
	must be above high-water level in washer, at least 71 cm
	(28 inches) from bottom of washer. Additional drain hose will be
	needed.

	Standpipe drain system:
	Needs a 5-cm (2-inch) minimum diameter standpipe with
	minimum carry-away capacity of 64 liters (17 gallons) per
C	minute. A 5-cm (2-inch) diameter to 2.5-cm (1-inch) diameter
	standpipe adapter, Part No. 3363920 must be used with 2.5-cm
	(1-inch) diameter drain system.
	Floor standpipe drain:
	Top of standpipe (C) must be at least 99 cm (39 inches) high and
	no higher than 183 cm (72 inches) from bottom of washer.

285320 (B)

71

5

64 2.5 5

2.5 3363920

(C) 99 183

Wall standpipe drain:
Top of standpipe (D) must be at least 99 cm (39 inches)high and	(D)	99 183

no higher than 183 cm (72 inches) from bottom of washer.

D

3