Whirlpool 8318507 installation instructions Requirements, Electrical

Page 4

Requirements

Electrical

! WARNING

! W

Electrical Shock Hazard

Plug into an earthed outlet.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire or electrical shock.

If codes permit and a separate earthing wire is used, it is recommended that a qualified electrician determine that the earthing path is adequate.

120-volts, 60-Hz, AC-only, 15- or 20-ampere, fused electrical

120

60-

15 20

supply is required. Time-delay fuse or circuit breaker is recommended. It is recommended that a separate circuit serving only this appliance be provided.

C

B

earthing prong

A

Recommended earthing method

For your personal safety, this washer must be earthed. This washer is equipped with a power supply cord (A) having a 3- prong earthing plug (B).

To minimize possible shock hazard, the cord must be plugged into a mating 3-prong earthing-type wall receptacle (C), earthed in accordance with local codes and ordinances. If a mating wall receptacle is not available, it is the personal responsibility and obligation of the customer to have the proper earthed wall receptacle installed by a qualified electrician.

(A)3- (B)

3-(C)

4

Image 4
Contents Installation Instructions Introduction Location WasherEarthed electrical outlet a is required within 152 cm Level Pliers Wrench Scissors Utility knifeDrain system Recessed area Or closetFloor standpipe drain Requirements ElectricalPreparation Installation StepsInlet hose Connection Drain hose Connection Standpipe or laundry tub drain systemFloor drain system Inlets are plastic. Do Not strip or crossthreadLeveling Washer Securing Drain hoseCompleting Installation FromNeed assistance?