OPERATING YOUR WASHER
Understanding what happens in each cycle
When the Cycle Control Knob is set to a number and pulled out, the washer fills (to the selected load size) before agitation and timing start. The washer begins agitating immediately after filling; agitation occurs with the washer lid up or down.
During agitation, the agitator creates a continuous rollover action
that provides a thorough cleaning of the wash load.
After agitation starts, the Cycle Control Knob turns clockwise until it points to an OFF area and the cycle ends.
The washer pauses briefly throughout each cycle. These pauses are normal for washer operation.
WASH
Fill
▼
Wash selected time
▼
Drain*
No agitation
▼
*The Permanent Press cycle partially drains, fills, agitates briefly, and drains.
Spin
▼
RINSE
Fill
▼
Rinse
▼
▼
▼
Spin
▼
Off
10