Washing sequence
Water inlet entrance
Wash timer
(To set to below 2 minute, first set to 5 minute then turn it back. It can increase the service life of the timer).
Wash selector | Spin timer |
(standard current, | (To set to below 1 minute, |
strong current) | first set to 2 minute then |
| turn it back. It can increase |
| the service life of the timer). |
15
12
9
3
6
5
4
3
1
2
Wash
Set the water inlet selector at the "WASH" side. (Figure 1)
2.Fill the water and add the dissolved washing powder to make the water level reach the preset position. (Figure 2)
Run washing program for some time to stir and dissolve the powder completely.
3.Put in the laundries. If the water quantity is insufficient, please add water.
4.Select the current.
Select the strength of the current according to the laundries. (Figure 3)
5.Select the washing time
Select the washing time according to the laundries. (Figure 4)
WASH
SPIN 
Figure 1
Figure 2
Figure 3
OFF
15
3 | Figure 4 |
|
12
6
9
6.After washing, Set the "WASH SELECTOR" at |
|
| Figure 5 | |
|
| |||
"DRAIN" in order to discharge the water. (Figure 5). |
|
|
|
|
|
|
|
| |
9